Guides

Bathroom and kitchen scale batteries

A scale that shows a number instead of a dial runs on a coin cell. Here is which one it takes, and how to change it.

1. Most bathroom scales take a CR2032

The CR2032 is 20 mm across and 3.2 mm thick, and holds about 225 mAh. It is the cell in most digital bathroom scales, and it usually lasts a year or more.

2. Kitchen scales often take a CR2025

The thinner CR2025 is 20 mm across but only 2.5 mm thick, and holds about 165 mAh. Read the code on the old battery, because two scales from the same brand can differ.

3. A flat battery gives a wrong weight

A scale with a tired cell shows a number that is wrong or drifts, or switches itself off. If the reading looks odd, change the battery before you blame the scale.

4. The sensor is what wears it down

A bathroom scale switches itself on each time you step on it, and that sensor is what drains the cell. A scale that goes to sleep when it is not being used lasts much longer.

5. It is a two-minute job

Slide out the tray, or open the cover on the bottom, and note which way round the old battery sits. Fit the new one the same way round, and put the cover back on properly.

More guidesAll batteries