Guides

Carbon monoxide alarm batteries

A carbon monoxide alarm that chirps every few minutes is usually telling you its battery is low. Here is how to change it, and how often to test it.

1. Most take a 9-volt battery

Many carbon monoxide alarms take a single 9-volt battery, and some take two AA cells. The type is printed next to the compartment, usually on the back or the side of the alarm.

2. Change the battery twice a year

Swap the battery every six months, and write the date on the alarm with a permanent marker. Test the alarm every week with the test button, and press and hold it until it sounds.

3. Replace the whole alarm every ten years

Carbon monoxide alarms carry a manufacture date on the back. Replace the alarm ten years after that date, or sooner if the maker says so, whatever the battery says, because the sensor itself ages too.

4. One in every room that matters

Put an alarm in every room with a fuel-burning appliance, in every bedroom, and in a hall outside any sleeping area. A hall alarm on its own leaves the people who sleep in the house unprotected.

5. Know the two sounds apart

The low battery chirp is a single beep every minute or so. The danger alarm is loud and continuous. If you are not sure which you are hearing, check the manual, and do not ignore either one.

More guidesAll batteries