Guides

Automatic pet feeder batteries

An automatic feeder that stops dispensing is often out of power or out of food. Here is how to check it, and how to keep it working.

1. It runs on AA cells, or on the plug

Most feeders take four or six AA cells so they keep going through a power cut. A corded feeder simply takes its power from the mains.

2. Which cells to use

Use alkaline unless the maker says otherwise, or rechargeable NiMH if it does. A feeder running on battery power turns the motor more slowly than one on mains, so it dispenses a smaller portion each time.

3. A partial portion is the low battery warning

Many feeders drop the last of a portion, or dispense half a meal, when the cells run down. That is the moment to change them, not when the motor finally stops.

4. Clean the chute

Food dust and grease in the chute stop the motor. Take the hopper off, wipe the chute out and tip the feeder so nothing spills, then run one test portion.

5. Run a test while you are there

Most feeders have a button that dispenses a single portion. Run it with the hopper full and the chute clear, so you know the motor works before you rely on it to feed your pet.

More guidesAll batteries