Guides

Power tool batteries

A drill or a saw that will not hold its charge usually needs new cells, not a new charger. Here is what goes in.

1. The cells inside are lithium-ion

A tool pack is built from lithium-ion cells, usually 18650 or 21700 cells. An 18650 holds about 3000 mAh and a 21700 about 4500 mAh, which is why the bigger cells sit in the bigger tools.

2. Buy the pack, not the cell

The cells inside a pack are not meant to be swapped one by one. Buy a pack of the right type for your tool, and check the voltage and the shape of the slide rails before you order.

3. Charge it the way the maker says

Use the charger that came with the tool, or one made for that chemistry and voltage. Charge a cold pack at room temperature, and never charge a pack that is wet, damaged or swollen.

4. Store it half charged

A pack you will not use for a few months is best stored at around half charge, in a cool dry place. Check it every couple of months and top it up, because a lithium cell stored empty can be hard to bring back.

More guidesAll batteries