Guides

Battery-powered security cameras

A camera that goes offline or misses clips often has a flat battery. Here is how these cameras are powered, and what to check before you buy anything.

1. Most run on a built-in rechargeable pack

A battery-powered camera has a lithium-ion pack inside and charges over USB. A few models take AA cells instead, and the compartment shows which kind yours uses.

2. Cold is the usual culprit

A lithium pack gives less power in the cold, so a camera outside in winter can show a flat battery on a mild day. Keep it out of the wind if the maker allows it.

3. Look at what the camera is recording

A camera set to record everything, or with a very sensitive motion zone, wakes often and drains the pack faster. Trim the zones and lower the sensitivity if the battery only lasts a few days.

4. A low battery can mean missing clips

Some cameras stop saving video before the low-battery warning appears, so a clip you were expecting may never exist. Charge the pack before you go away, and check the app after.

5. The hub has a battery too

If the camera connects to a hub or a base station, the hub has its own power supply and battery. A dead hub battery can take the whole system down even when every camera is fine.

More guidesAll batteries