Guides

Using two batteries together

Sometimes a device asks for two cells, and sometimes you want to build a supply of your own. Here is how the two cases differ.

1. End to end gives more volts

Two cells wired in series add their voltages together. Two 1.5-volt AA cells make 3 volts, which is why some devices ask for two. The pair is only half used when the first cell runs out.

2. Side by side gives more capacity

Two cells wired in parallel keep the same voltage and run for twice as long. Both should be the same type and about the same age, because the weaker cell decides when the pair is finished.

3. Never mix types

Do not put a fresh alkaline cell next to an old rechargeable one. The different voltages can make the weaker cell leak, and a leak inside a device is a bigger problem than a flat battery.

4. Use a proper holder

A battery holder that joins cells the right way is cheap, and safer than wires twisted together. It keeps the terminals apart, stops them shorting against a coin, and holds the cells where they cannot roll around.

More guidesAll batteries